Course Objectives
Through this course, understanding of the following will be facilitated
1. Understand layer function of 2D CAD, Drawing basic design drawing
2. Practice of modeling and assembly functions using 3D CAD
3. Cooperation from CAD to CAM and CAE
Rubric
| Ideal Level of Achievement (Very Good) | Standard Level of Achievement (Good) | Unacceptable Level of Achievement (Fail) |
| Evaluation 1 | Clearly understands the layer functions of 2D CAD and has the ability to draw some design drawing in detail. | Ability to understand the layer functions of 2D CAD in general, and carry out basic design drawings. | Unable to understand the layer function of 2D CAD in general, and unable to carry out basic design drawings. |
| Evaluation 2 | Clearly understands modeling and assembly functions using 3D CAD in detail and has the ability to apply to design surely. | Ability to practice modeling and assembly functions using 3D CAD in general, and carry out basic design. drawings. | Unable to practice modeling and assembly functions using 3D CAD in general, and unable to carry out basic design drawings. |
| Evaluation 3 | Clearly understands cooperation from CAD to CAM and CAE and has the ability to apply to some design drawing in detail. | Ability to understand cooperation from CAD to CAM and CAE in general, and carry out basic design drawings. | Unable to understand cooperation from CAD to CAM and CAE in general, and unable to carry out basic design drawings. |
Assigned Department Objectives
Diploma policy 1
See
Hide
Teaching Method
Outline:
In this course, you will learn about the basic concepts of CAD, and you will also understand the importance and convenience of this function by learning about the layer functions of 2D CAD. In the exercise of 3D CAD, you will practice modelling and assembly, and you will also learn about cooperation from CAD to CAM and CAE.
Style:
For the purpose of understanding CAD and CAE system, lectures and exercises will facilitate the learning of the principles and examples.
Notice:
We don't want you to be absent or late for this lesson, because this lesson has a strong practical element based on the operation of CAD software.
Course Plan
|
|
|
Theme |
Goals |
| 1st Semester |
| 1st Quarter |
| 1st |
Overview of the CAD system |
|
| 2nd |
Description of the basic commands and initial settings of 3D CAD |
Introduction of CAD system
|
| 3rd |
Basic usage of 3D CAD (1) |
Ability to understand layer function
|
| 4th |
Basic usage of 3D CAD (2) |
Ability to draw basic design drawing
|
| 5th |
Basic usage of 3D CAD (3) |
Ability to draw basic design drawing
|
| 6th |
Creating parts with 3D CAD (1) |
Ability to carry out modelling using 3D CAD
|
| 7th |
Creating parts with 3D CAD (2) |
Ability to carry out modelling using 3D CAD
|
| 8th |
Creating parts with 3D CAD (3) |
Ability to draw gear using 3D CAD
|
| 2nd Quarter |
| 9th |
Assembling machine elements by 3D CAD (1) |
Ability to carry out assembly using 3D CAD
|
| 10th |
Assembling machine elements by 3D CAD (2) |
Ability to carry out assembly of gearbox using 3D CAD
|
| 11th |
Transition from 3D data to 2D drawing (1) |
Ability to prepare three-plane drawing using CAD system
|
| 12th |
Transition from 3D data to 2D drawing (1) |
Ability to draw flange using CAD system
|
| 13th |
General exercise (1) |
Ability to understand numerical analysis method using CAD system
|
| 14th |
General exercise (2) |
Ability to calculate bending stress of beam using CAD system
|
| 15th |
General exercise (3) |
Ability to calculate tensile stress of shaft using CAD system
|
| 16th |
Summary |
|
Evaluation Method and Weight (%)
| Examination | Presentation | Mutual Evaluations between students | Behavior | Portfolio | Other | Total |
| Subtotal | 0 | 0 | 0 | 0 | 100 | 0 | 100 |
| Basic Ability | 0 | 0 | 0 | 0 | 40 | 0 | 40 |
| Technical Ability | 0 | 0 | 0 | 0 | 40 | 0 | 40 |
| Interdisciplinary Ability | 0 | 0 | 0 | 0 | 20 | 0 | 20 |