Course Objectives
Course objectives are:
(1)You will lean how to use machines, and lean knowledge of that, comprehensively. You will lean not only useage skill of the machines through machining training, and learn mechanism of the machining for understaing physical phenomenan, and for obtaining engineering scence also.
(2)You will learn and obtain engineer's atittude, and learn means of costume for safety. And you will learn importance of team works and comunication of the work.
Rubric
| Ideal Level | Standard Level | Unacceptable Level |
Hand finishing and Lathe machine | You can acquire how to use lathe machine, and you can use 80 % functions of the machine. | You can acquire how to use lathe machine, and you can use 60 % functions of the machine.% machines. | You can acquire how to use lathe machine. But you do not use 60 % functions of the machine. |
Surface roughness tester | You can acquire how to use Surface roughness tester, and you can explain the 80 % measurement results. | You can acquire how to use Surface roughness tester, and you can explain the 60 % measurement results. | You can acquire how to use Surface roughness tester, and you can not explain the 60 % measurement results. |
electronic microscope | You can acquire how to use Surface roughness tester, and you can explain the 80 % measurement results. | You can acquire how to use Surface roughness tester, and you can explain the 60 % measurement results. | You can acquire how to use Surface roughness tester, and you can not explain the 60 % measurement results. |
Assigned Department Objectives
Teaching Method
Outline:
As Machine Training, following subjects wiii be done, 1)As Machine Training (Hand finishing and Lathe machine) , 2)Roughness of machined surface using surface roughness tester and 3) Observation of the structure of the machined surface by electronic microscope.
Style:
Lecture and Training at training factory.
Notice:
You have to comply supervisor instractions. You have to take training costume for avoiding dangelous at the training.
Can take makeup exam in need aid up to maximum of 50 points.
Characteristics of Class / Division in Learning
Course Plan
|
|
|
Theme |
Goals |
2nd Semester |
3rd Quarter |
1st |
Orientation and safety lecture. |
You have explanation of lecture and safety training for beginner.
|
2nd |
Orientation and safety lecture. |
You have explanation of lecture and safety training for beginner.
|
3rd |
Lathe machine |
You will learn metal lathe machine. You will learn how to axial end milling, peripheral milling and partial cutting by metal lathe.
|
4th |
Lathe machine |
You will learn metal lathe machine. You will learn how to axial end milling, peripheral milling and partial cutting by metal lathe.
|
5th |
Lathe machine |
You will learn metal lathe machine. You will learn how to axial end milling, peripheral milling and partial cutting by metal lathe.
|
6th |
Hand finishing |
You will learn how to use a tool for making a mark-off line. You will learn how to use a file for hand finishing a plane or R curves. You will learn drilling and tapping of screw hole.
|
7th |
Hand finishing |
You will learn how to use a tool for making a mark-off line. You will learn how to use a file for hand finishing a plane or R curves. You will learn drilling and tapping of screw hole.
|
8th |
Hand finishing |
You will learn how to use a tool for making a mark-off line. You will learn how to use a file for hand finishing a plane or R curves. You will learn drilling and tapping of screw hole.
|
4th Quarter |
9th |
Roughness of machined surface using surface roughness tester |
You will learn how to use surface roughness tester and Roughness measurement.
|
10th |
Roughness of machined surface using surface roughness tester |
You will learn how to use surface roughness tester and Roughness measurement.
|
11th |
Roughness of machined surface using surface roughness tester |
You will learn how to use surface roughness tester and Roughness measurement.
|
12th |
Observation of the structure of the machined surface by electronic microscope |
You will learn how to surface observation method by electronic microscope
|
13th |
Observation of the structure of the machined surface by electronic microscope |
You will learn how to surface observation method by electronic microscope
|
14th |
Observation of the structure of the machined surface by electronic microscope |
You will learn how to surface observation method by electronic microscope
|
15th |
Returning reports and revise |
Returning reports and revise
|
16th |
|
|
Evaluation Method and Weight (%)
| Reports | Total |
Subtotal | 100 | 100 |
Basic Proficiency | 100 | 100 |
Specialized Proficiency | 0 | 0 |
Cross Area Proficiency | 0 | 0 |