英会話

科目基礎情報

学校	都城工業高等専門学校	開講年度	2018
授業科目	英会話
科目番号	0028	科目区分	一般 / 必修
授業形態	講義	単位の種別と単位数	履修単位: 1
開設学科	機械工学科	対象学年	2
開設期	後期	週時間数	2
教科書/教材	Outfront. Practical English Conversation
担当教員	バットランド ダンカン

到達目標

At the completion of this course students will be able to listen and respond with improved English fluency about topics including family and home, hobbies and preferences, and daily routines. Simple grammar structures will be reinforced giving students confidence to speak and use English in communicative situations.

ルーブリック

	理想的な到達レベルの目安	標準的な到達レベルの目安	未到達レベルの目安
評価項目1 Listening	Students can listen to an English conversation and completely understand the main gist and all the details.	Students can listen to an English conversation and understand the main gist, and most of the details, although some misunderstandings may occur.	Students can listen to an English conversation but there may be some misunderstandings about the main gist, and some important details may also be misunderstood.
評価項目2 Speaking	Students can completely understand and respond to an English conversation and get their answer understood with no, or very minor, vocabulary or grammatical errors.	Students can understand and respond to an English conversation and get their answer understood, though some vocabularly or grammatical errors will occur.	Students can understand and respond to an English conversation and be understood despite major grammatical or vocabulary errors.
評価項目3 Homework/Participation	Students completed all homework, participated enthusiastically in all activities to a high degree using only English	Students completed most homework and participated in the activities well, although sometimes lapsed back into using Japanese.	Students missed some homework and completed the communicative activities using basic English, but sometimes used Japanese.

教育方法等

概要:

To develop speaking fluency and English communicative ability. The focus is not on learning grammar, but instead on providing real opportuities to use and communicate in English.

授業の進め方・方法:

This is a STUDENT centred class, not a teacher centred class. This means students will be responsible for their own learning and will be required to fully participate in every class and all activities. There will be minimum input from the teacher in order to maximise student output. Every class, all students will be required to participate in group or pairwork discussions, and roleplays using ONLY English. Speaking Japanese is not allowed. The homework for this course is integrated into the lesson so failure to complete the homework will mean the student can not participate in the following lesson which will result in participation points being deducted.
Students should use the dictionary at the back of the textbook to pre-learn vocabulary that will be used for each lesson. All homework must be completed before the start of the next lesson.

注意点:

授業計画

		週	授業内容	週ごとの到達目標
後期
	3rdQ
		1週	授業計画の説明 Course introduction	Explanation of course requirements and teacher expectations
		2週	Unit 1: About oneself.	Greetings and partings, Talking about yourself, asking questions about others.
		3週	Unit 2: Family and home.	Describing family relationships, ones home and community.
		4週	Unit 3: Hobbies and Preferences.	Discussing preferences, expressing opinions, politely disagreeing
		5週	Unit 4: Time and Dates.	Asking and telling the time, using calendar dates, discussing schedules.
		6週	Unit 5: Shopping.	Working with numbers, dealing with money, making purchases.
		7週	Unit 6: Routines.	Talking about daily routines, discussing frequency of activities.
		8週	Unit 7: Vacations.	Discussing vacations, past experiences
	4thQ
		9週	Unit 8: Help! I'm lost.	Locating buildings, giving and following simple directions.
		10週	Unit 9: Travel.	Making requests, taking/leaving phone messages, making reservations.
		11週	Unit 10: Free time.	Inviting a friend out, accepting or refusing invitations.
		12週	Unit 11: Eating Out.	Ordering and eating out at restaurants.
		13週	Unit 12: Health.	Health and sickness related vocabulary and discussion.
		14週	Pre exam review	Review of second semester.
		15週	試験答案の返却及び解説	試験問題の解説及びポートフォリオの記入
		16週

モデルコアカリキュラムの学習内容と到達目標

分類		分野	学習内容	学習内容の到達目標	到達レベル	授業週
専門的能力	分野別の専門工学	機械系分野	工作	鋳物の作り方、鋳型の要件、構造および種類を説明できる。	2
				精密鋳造法、ダイカスト法およびその他の鋳造法における鋳物の作り方を説明できる。	2
				塑性加工の各加工法の特徴を説明できる。	2
			材料	機械材料に求められる性質を説明できる。	3
				金属材料、非金属材料、複合材料、機能性材料の性質と用途を説明できる。	3
				引張試験の方法を理解し、応力-ひずみ線図を説明できる。	2
				硬さの表し方および硬さ試験の原理を説明できる。	4
				脆性および靱性の意味を理解し、衝撃試験による粘り強さの試験方法を説明できる。	4
				疲労の意味を理解し、疲労試験とS-N曲線を説明できる。	4
				機械的性質と温度の関係およびクリープ現象を説明できる。	4
				金属と合金の結晶構造を説明できる。	4
				金属と合金の状態変化および凝固過程を説明できる。	4
				合金の状態図の見方を説明できる。	4
				塑性変形の起り方を説明できる。	4
				加工硬化と再結晶がどのような現象であるか説明できる。	4
				鉄鋼の製法を説明できる。	4
				炭素鋼の性質を理解し、分類することができる。	4
				Fe-C系平衡状態図の見方を説明できる。	4

評価割合

	定期試験	口頭発表	合計
総合評価割合	70	30	100
知識の基本的な理解	70	30	100
思考・推論・創造 へ の 適 応 力	0	0	0
汎用的技能	0	0	0
態度・志向性 （人間力）	0	0	0
総合的な学習経験 と創造的思考力	0	0	0